HP 2530p - EliteBook - Core 2 Duo 2.13 GHz Kullanıcı Kılavuzu - Sayfa 9

Masaüstü HP 2530p - EliteBook - Core 2 Duo 2.13 GHz için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. HP 2530p - EliteBook - Core 2 Duo 2.13 GHz 24 sayfaları. Notebook pc
Ayrıca HP 2530p - EliteBook - Core 2 Duo 2.13 GHz için: Teknik Özellikler (36 sayfalar), Ürün Kılavuzu (16 sayfalar), Kullanıcı Kılavuzu (15 sayfalar), Ağ Kılavuzu (16 sayfalar), Teknik Özellikler (2 sayfalar), Kullanıcı Kılavuzu (27 sayfalar), Kurulum Kılavuzu (19 sayfalar), Genel Bakış (16 sayfalar), Manuallines (12 sayfalar), Yazılım Kurulum Kılavuzu (8 sayfalar), Manuallines (6 sayfalar), Kurulum ve Yapılandırma Kılavuzu (18 sayfalar), Sürücü Kurulumu (20 sayfalar), Manuel (20 sayfalar), Manuallines (7 sayfalar), Kullanıcı Kılavuzu (31 sayfalar), Kullanıcı Kılavuzu (46 sayfalar), Kullanıcı Kılavuzu (44 sayfalar), Kullanıcı Kılavuzu (42 sayfalar), Teknik Özellikler (45 sayfalar), Kullanıcı Kılavuzu (30 sayfalar), Quickspecs (46 sayfalar)

Sayfayı Yazdır
HP 2530p - EliteBook - Core 2 Duo 2.13 GHz Kullanıcı Kılavuzu
Function
Display battery information.
Decrease screen brightness.
Increase screen brightness.
Activate the ambient light sensor.
To use a hotkey command on the computer keyboard, follow either of these steps:
●
Briefly press the
– or –
●
Press and hold down the
release both keys at the same time.

Displaying system information (fn+esc)

Press
fn+esc
number.
In the Windows
as the BIOS date. On some computer models, the BIOS date is displayed in decimal format. The BIOS
date is sometimes called the system ROM version number.

Initiating Standby (fn+f3)

Press
fn+f3
When Standby is initiated, your information is stored in memory, the screen is cleared, and power is
conserved. While the computer is in Standby, the power lights blink.
CAUTION:
The computer must be on before you can initiate Standby.
NOTE:
If a critical battery level occurs while the computer is in Standby, the computer initiates
Hibernation and the information stored in memory is saved to the hard drive. The factory setting for
critical battery action is Hibernate, but this setting can be changed in advanced power settings.
To exit Standby, briefly press the power button.
The function of the
Hibernation instead of Standby.
NOTE:
In all Windows operating system windows, references to the sleep button apply to the
hotkey.
fn
key, and then briefly press the second key of the hotkey command.
fn
key, briefly press the second key of the hotkey command, and then
to display information about system hardware components and the system BIOS version
fn+esc
display, the version of the system BIOS (basic input-output system) is displayed
to initiate Standby.
To reduce the risk of information loss, save your work before initiating Standby.
fn+f3
hotkey can be changed. For example, you can set the
Hotkey
fn+f8
fn+f9
fn+f10
fn+f11
fn+f3
hotkey to initiate
fn+f3
Using hotkeys
5