ALLNIC AUDIO H-3000 Kullanıcı El Kitabı - Sayfa 5
Amplifikatör ALLNIC AUDIO H-3000 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. ALLNIC AUDIO H-3000 14 sayfaları. Phono stage
Ayrıca ALLNIC AUDIO H-3000 için: Kullanıcı El Kitabı (12 sayfalar)
Sayfayı Yazdır
construction of phono stage amplifiers. However,
Allnic Audio manufactures a high quality LCR RIAA unit
and has developed a 600 ohms impedance matching
method.
The H-3000 Phono Stage is all transformer
coupled.
No negative feedback design with only two gain
stages
For superior signal to noise ratios, the H-3000 is
equipped with pure vacuum tube, high speed,
automatic voltage regulation for each channel and
a power supply unit separate from the phono
stage itself.
High quality MC Step-up Transformers with
Permalloy cores are used for the H-3000's dual MC
inputs.
New vacuum tube damping technology – Allnic
Audio's patented "Absorb GEL tube damper"
technology prevents harmful vibrations from
reaching the signal / gain tubes and, therefore,
prevents micro-phonic noise propagation in the
tubes. The Allnic Audio Absorb Gel damper
technology effectively solves a problem that
plagues most tube amplification systems. Provided
other tube components do not introduce micro-
phonic noise into your system, with the Absorb Gel
damping system, you will enjoy a degree of
transparent sound that will surprise and please
you.
Pure Class A operation
Pure balanced operation
As are all Allnic Audio products, the H-3000 is fully
RoHS (EU Reduction of Hazardous Substances
regulation) compliant in construction and materials
WHAT'S IN THE BOX?
Please check that the shipping box contains the
following:
One (1) Allnic H-3000 phono stage – in natural
aluminum or black, depending on your order
specification
One (1) Power Supply for H-1500 II/H-3000– in
natural aluminum or black, depending on your
order specification
One (1) power umbilical cord
One (1) IEC type power cord
One (1) Owner's Manual
Note:
1)
The H-3000 and its power supply ship with the
tubes installed.
2)
The H-3000 power supply will work with most IEC
type aftermarket power cords. Of course, only you
can determine the power cord that works most
synergistically with the H-3000 in your system.
3)
Be sure the H-3000 power supply unit is labeled
for the AC voltage of your location. If it is not,
please contact Hammertone Audio.
We advise that you keep the boxes and other packing
materials that your H-3000 came in. It will be useful if you
sell your H-3000 or in the unlikely event you need to ship it
or the power supply for service.
SAFETY
Remove ALL protective cushioning material inside
the tube chimneys before operation. The tube
chimneys should contain NOTHING except the
tubes.
Disconnect the power cord by pulling the plug, not
the cable.
Do not attempt any repairs. Do not remove the
units' chassis covers without specific authorization
from Hammertone Audio.
Keep the power cords away from heat sources
Keep the units away from liquids – do not allow
any liquid to enter the interior of the units.
When the units are moved from a cold to a warm
environment, allow sufficient time for any condensation
to evaporate in both units before plugging the power
supply unit into an AC connection.
Do not attempt any repairs.
Do not remove the units' chassis covers without specific
authorization from Hammertone Audio.
See the notes on "Location, Location, Location".
CLEANING
A.
Chassis
Use only a soft, lint-free cloth dampened slightly with water
only (NO cleaning fluids!) to clean the faceplate and chassis
of the H-3000 and its power supply.
5