Allo.com 4aCP1e Kurulum Kılavuzu - Sayfa 12

Bilgisayar Aksesuarları Allo.com 4aCP1e için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Allo.com 4aCP1e 14 sayfaları. Digital card

Allo E1/T1 PRI Card Quick Installation Guide

# dahdi_genconf –vvvvv

By running "dahdi_genconf", it will generate /etc/dahdi/system.conf and etc/asterisk/dahdi-

channels.conf automatically. Check whether the generated files information agrees with your

hardware setup, if not, you should modify to your specific requirements.

Dahdi_genconf-vvv channels configure with Asterisk

Do not forget to include"dahdi-channels.conf" in "chan_dahdi.conf" to configure Dahdi

channels with asterisk, if not, run command:

# echo "#include dahdi-channels.conf" >> /etc/asterisk/chan_dahdi.conf

Execute the following command:

# dahdi_cfg–vvvvv

This command is used for the entire spans channels configuration.

To check dahdi hardware devices run the command "dahdi_hardware" from the command

prompt a sample output is shown below.

After compiling and installing DAHDI and Asterisk, load the Dahdi driver by running:

Check alloPL4xxp show with + symbol "+ shows module loaded "

Start the Asterisk by executing

# asterisk -gvvvvvvvvvc

Make sure that PRI spans are up and active, before making calls. Here is the command to check

the PRI span status

CLI>pri show spans

www.allo.com

Version 2.1