ABB ACS880-01 Series Kullanıcı Kılavuzu - Sayfa 6

Endüstriyel Ekipmanlar ABB ACS880-01 Series için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. ABB ACS880-01 Series 18 sayfaları. Industrial drives
Ayrıca ABB ACS880-01 Series için: Kurulum Kılavuzu (20 sayfalar), Hızlı Kurulum Kılavuzu (14 sayfalar), Manuel (16 sayfalar), Hızlı Kurulum ve Başlatma Kılavuzu (17 sayfalar)

Sayfayı Yazdır

Basic start-up

1. Lay the democase on its back (so that the door is pointing up) and open the door.

2. Pull the demo out of the case using the lifting strap and the handle hole (on the

lower part of the demo.) Warning! The demo weighs approximately 25kg. Use of

proper lifting technique with a straight back is advised.

3. Take out the mains cord and Ethernet cable from the pocket at the back of the

demo.

4. Plug in the mains cord and Ethernet cable (to connections marked: mains cord,

IO-panel connection A and IO-panel connection B on the layout section.)

5. Check that the Input voltage switch (115V/230V) is set according to the supply

voltage.*

6. Check that the Drive Main Supply is switched on.

7. Switch on the demo using the mains switch.

8. You can toggle control between the control panel and the IO-panel with the

"Loc/Rem" –button on the control panel.

* For more information check "AC input (supply) connection" in the Technical data

section

Mechanical brake

The mechanical brake is intended for momentary impulse braking for load

demonstration purposes. The mechanical brake is not designed for continuous load

which might damage the transformer and the brake itself.

User's manual – ACS880 01 democase

ac.maher.co.ir