Miller Infinity Series Kullanıcı El Kitabı - Sayfa 15
Kaynak Aksesuarları Miller Infinity Series için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Miller Infinity Series 32 sayfaları. Auto-darkening helmets
Ayrıca Miller Infinity Series için: Kullanıcı El Kitabı (32 sayfalar)
Sayfayı Yazdır
5-2.
Mode Control Button And Low Battery/Grind/Memory Function
Light
2
1
�
The auto-darkening lens turns on
(darkens) automatically when welding
begins and turns off when welding
stops.
1 Mode Button
Press Auto On/Off (Mode) button to check if
the lens is working properly and to begin
Mode and Info adjustments.
When the Auto On/Off (Mode) button is
pressed, the LCD control panel will turn On.
Press and hold the Auto On/Off button to
turn the LCD control panel Off. Lens is on
and will function properly.
(R)
MEMO(B)
�
2 Low Battery/Grind/Memory Light
The Low Battery/Grind/Memory light blinks
when the lens is in the Grind mode. Light
stays on when 2– 3 days of battery life
remain.
If battery power is low, replace with Pana-
sonic CR2450 lithium batteries (2 required,
Miller Part No. 217043). See Section 8-1.
ARC
TIME
MEMO
1
After four minutes of inactivity, the LCD
control panel will turn off automatically
to conserve power. Press any button
to wake up the LCD control panel.
COUNT
2
OM-289711 Page 13