Miller Infinity Series Kullanıcı El Kitabı - Sayfa 18
Kaynak Aksesuarları Miller Infinity Series için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Miller Infinity Series 32 sayfaları. Auto-darkening helmets
Ayrıca Miller Infinity Series için: Kullanıcı El Kitabı (32 sayfalar)
Sayfayı Yazdır
5-5.
Lens Delay Control
2
1 Lens Delay Adjustment Buttons
2 Mode Control Button
Use the Lens Delay Short and Long buttons
to adjust the time for the lens to switch to the
clear state after welding or cutting.
The delay is particularly useful in eliminating
bright after-rays present in higher amperage
applications where the molten puddle re-
mains bright momentarily after welding. Use
the Lens Delay Control buttons to adjust de-
lay from 0 to 10 (0.1 to 1.0 second).
The delay ranges for each mode are as
follows:
OM-289711 Page 16
(R)
MEMO(B)
Weld, Cut, And X-Modes - No. 0–No. 10
Grind Mode - No delay adjustment
�
Lens Delay Adjustment Procedure
� Press Mode button to turn helmet On.
� Press Mode button to select desired
� Use Short and Long adjustment buttons
� Begin welding or continue with other
TIME
1
1
There is no lens delay adjustment in
the Grind mode.
function: Weld, Cut, or X-Mode.
to select desired delay.
lens adjustments.
ARC
COUNT
MEMO
2