Miller 1025 Operatör El Kitabı - Sayfa 11

Kamera Aksesuarları Miller 1025 için çevrimiçi göz atın veya pdf Operatör El Kitabı indirin. Miller 1025 13 sayfaları. Fluid head

Sayfayı Yazdır
Miller 1025 Operatör El Kitabı
Storage
The Arrow 40/55 Fluid Head can be stored for extended
periods; Miller recommends storage in a Miller Soft Case
and the following:
Remove battery.
◗
Clean the external surfaces.
◗
Keep in a dry place away from direct sunlight.
◗
Loosen off PAN & TILT LOCK.
◗

Spare Parts and Accessories

ITEM
Battery
Camera plate Assembly (Including 3/8" + 1/4" screws)
Camera screw 3/8"
Camera screw 1/4"
Telescopic Pan Handle assembly (incl. Handle Clamp) # 694
Standard Pan Handle
Soft Case
Soft Case
Clamp nut

Warranty

Please refer to warranty card for complete details.
Service, Sales and Support
Miller Authorised Service Agents must carry out all service
and repair work. Failure to observe this requirement may void
warranty. It is advisable to notify Miller or a Miller Authorised.
Service Agent if a change of performance is observed as a
result of dropping or rough usage. For information regarding
sales and service of Miller products or for your nearest Miller
representative please contact us via our website or at the
following:
MILLER CAMERA SUPPORT EQUIPMENT
30 Hotham Parade, Artarmon, Sydney, NSW 2064 Australia
Tel: +61 2 9439 6377
ITEM NO.
P3798
MILLER Camera Support (LLC) USA
# 860
218 Little Falls Road, Cedar Grove, New Jersey 07009-1231 USA
Tel: (973) 857 8300
P0037
P0036
MILLER FLUID HEADS (EUROPE) LTD.
Unit A2, Ford Lane Industrial Estate
# 692
Ford Lane, Ford, West Sussex BN18 0DF, United Kingdom
Tel: +44 (0)1243 555255 Fax: +44 (0)1243 555 001
# 870
# 872
P3836
Website - www.millertripods.com
1 0
Fax: +61 2 9438 2819
Fax: (973) 857 8188