Miller cineline 70 Operatör El Kitabı - Sayfa 11

Kamera Aksesuarları Miller cineline 70 için çevrimiçi göz atın veya pdf Operatör El Kitabı indirin. Miller cineline 70 17 sayfaları. Fluid head

4.4 Using a 3 mm Hex key unlock the LOCK SCREW (fig. 6),

then using a broad flat screw driver turn the ADJUSTING

SCREW (fig. 6) in the direction shown by 1/8 of a turn

and re-check step 4.2, repeat 4.4 if necessary. When

adjusted correctly, the SIDE LOAD LOCK LEVER will be

smooth to operate and require modest effort to lock the

CAMERA PLATE.

4.5 Once the correct adjustment is achieved, remove the

CAMERA PLATE and lock the LOCK SCREW.

Camera Plate

Turn Adjustment Screw

Counterclockwise to

compensate for a wider

camera plate.

Correct position of Side

Load Lock Lever at the

start of locking action.

Turn Adjustment Screw

Clockwise to compensate

for a narrower camera plate.

Fig. 9