Miller T94i Series Kullanıcı El Kitabı - Sayfa 23
Motosiklet Aksesuarları Miller T94i Series için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Miller T94i Series 40 sayfaları. Auto-darkening helmets
Ayrıca Miller T94i Series için: Manuel (32 sayfalar)
Sayfayı Yazdır
SECTION 6 – ADJUSTING HEADGEAR
6-1.
Adjusting Headgear On T94 Series Helmets
1
2
�
4
1 Headgear Top
Adjusts headgear for proper
depth on the head to ensure
correct balance and stability.
2 Headgear Tightness
To adjust, turn the adjusting
knob located on the back of
the headgear left or right to
desired tightness.
3 Angle
Shown)
Seven slots on the right side
of the headband provide ad-
justment for the forward tilt of
the helmet. To adjust, lift and
reposition the control arm to
the desired position.
4 Distance Adjustment
Adjusts the distance between
the face and the lens. To ad-
just, press black tabs on the
top and bottom of the pivot
point and use other hand to
slide headgear forward or
backward.
(Both sides must be equally
positioned for proper vision.)
�
There are four headgear
adjustments: headgear
top,
tightness,
angle,
and distance.
Adjustment
Release
Numbers on the adjust-
ment slides indicate set
position so both sides
can be adjusted equally.
OM-255503 Page 21
(Not
tabs.