ABB G391 Series Hızlı Başlangıç Kılavuzu - Sayfa 10

Endüstriyel Ekipmanlar ABB G391 Series için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. ABB G391 Series 13 sayfaları. Edge ac short circuit current limiter

ABB G391 Series Hızlı Başlangıç Kılavuzu
QUICK START GUIDE

Step 3. Assemble EDGECABG391 to cabinet

1.
Assemble the base panel assembly to the top of the
cabinet using the 8 #6-32 screws provided.
Torque to 10in-lb. (Nm)
2. Pull the wires that were previously connected to the
twist-n-lock receptacles (Step 2, 2) through the two
grommeted holes in the base panel and terminate to
the fuse blocks. The fuse blocks are labeled A and B.
Attach the wires removed from the A receptacle to
the fuse block labeled A. Repeat for the B block. Each
fuse position is labeled L1, L2, or L3. Terminate red
wire to L1, black wire to L2, and blue wire to L3.
Torque to 25in-lb.
Note: Cover is hidden in figure 8 and figure 9 to show the screw locations and wiring clearly. During assembly the
cover does not need to be removed.
Page 10
© 2023 ABB. All rights reserved.
Screws
Edge_Ilim_G391_QSG
Screws

Figure 8 Panel assembly

Figure 9 Wire connections

Version. 2.0