Panasonic AG-HPX500 Bilgi menüsü - Sayfa 14

Video Kamera Panasonic AG-HPX500 için çevrimiçi göz atın veya pdf Bilgi menüsü indirin. Panasonic AG-HPX500 16 sayfaları. Broadcast cameras
Ayrıca Panasonic AG-HPX500 için: Broşür ve Teknik Özellikler (16 sayfalar)

Sayfayı Yazdır

OTHER FUNCTIONS screen

Item
Saves users files on, loads users files from the storage area of the camera (EEPROM), and initializes
the storage area.
●----: Off (no operation)
●LOAD: Loads the settings in a user file previously stored on the storage area.
USER FILE
●SAVE: Saves the user file updated settings on the storage area.
●INITIAL: Returns the user settings in the user file to their factory defaults.
• After a LOAD or INITIAL operation, turn the POWER switch off and then back on again to make the
new settings available.
• An INITIAL operation does not change the setting of the menu option TIME ZONE.
Sets the control method for backup recording using a backup unit connected to the 1394 terminal.
●OFF: The backup unit is not controlled.
●EXT: The backup unit can be controlled by the START/STOP button. The images shot by the camera
recorder are recorded by the backup unit. Note that the camera recorder does not record them.
1394CONTROL
●BOTH: The images shot by the camera recorder are recorded by both the camera recorder and
●CHAIN: When the camera recorder's media approaches its end during shooting, the backup unit in
Sets how the START/STOP button works for the backup unit.
●REC_P: This switches between recording and pause.
1394CMD SEL
●STOP: This switches between recording and stop.
If the backup unit does not have a rec pause function, select STOP.
Selects the terminal for data transfer. (You cannot select USB and 1394 at the same time.)
●USB DEVICE: Mode for sending files using the USB connector.
●1394 DEVICE: Mode for sending files using the 1394 connector.
PC MODE
●1394 HOST: Mode for copying files from the P2 card onto an external hard disk drive using the 1394
Enables or disables the access LED. The L-SIDE is the left side as seen from the lens (the P2 card slot
side).
●OFF L-SIDE: OFF R-SIDE: OFF
ACCESS LED
●SLOT SIDE L-SIDE: ON R-SIDE: OFF
●LCD SIDE L-SIDE: OFF R-SIDE: ON
●BOTH L-SIDE: ON R-SIDE: OFF
Turns the alarm function on and off.
ALARM
●ON, OFF
Sets the SAVE lamp operation.
●SAVE: Lights when the SAVE/STBY switch is set to SAVE. Off during recording.
SAVE LED
●P2CARD: Blinks when a warning message appears to indicate that there is little space left on a P2
CLOCK SET
Sets the camera-recorder's calendar.
Adds to or deducts from GMT the time value of –12:00 to +13:00 in 30-minute steps. (As an exception,
TIME ZONE
you can set +12:45.) (Page XX)
●+9:00
Sets the Menu language.
●ENGLISH
LANGUAGE
●JAPANESE
●CHINESE
Determines which signal to lock on to.
GL SELECT
●SDI, COMPOSITE, COMPONENT
Determines whether to perform a 90H shift (ON) or not (OFF).
GL PHASE
●ON, OFF
Adjusts the phase.
H PHASE
●–511 ~ 0 ~ +511
Switches between NTSC and PAL.
SYSTEM FREQ
●59.94 Hz, 50 Hz
Description of settings (Items in bold are factory settings.)
backup unit.
the recording standby mode automatically starts recording images.
connector.
card.
119
Setup menu list