AQUASONIC DILUVIO Kurulum Kılavuzu

Aydınlatma Ekipmanları AQUASONIC DILUVIO için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. AQUASONIC DILUVIO 2 sayfaları. Face ring

DILUVIO

Carefully remove the speaker from its box and set aside. Remove the black o-ring from inside the red gasket

and dispose.

Install the mounting gasket around the rubber ring of the sound lens. The gasket's flat side will go towards

the face ring. The grooved side faces the speaker body. Ensure the mounting gasket is installed evenly and

is firmly seated against the entire circumference of the sound lens.

Flat side

Loosen the nut on the wire clamp. With the mounting gasket facing up, place the wire clamp over the sound

lens. The bolt & nut should be facing down towards the speaker not the sound lens.

Nut

Wire Clamp

NOTE: If using the Stainless Steel Screen, install before step 4.

™

FACE RING INSTALLATION GUIDE

Grooved Side

12905 Division Street, Suite C

Littleton, CT 80125

Phone: 303-797-7500