Panasonic WV-SP305 Kurulum Kılavuzu - Sayfa 16
Video Kamera Panasonic WV-SP305 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Panasonic WV-SP305 36 sayfaları. Ip video cameras
Ayrıca Panasonic WV-SP305 için: Teknik Özellikler (2 sayfalar), Karşılaştırma Tablosu (6 sayfalar), Özellikler & Spesifikasyonlar (2 sayfalar), Özellikler (2 sayfalar), Entegrasyon Notu (8 sayfalar)
Sayfayı Yazdır
Major operating controls
<Side view>
F.A.
SDCARD LOCK
Focus assist button
<Rear view>
Network connector
Access indicator
(blinking at accessing)
Link indicator (lighting at linking)
Monitor for adjustment
Output connector
EXT I/O terminals
About the [INITIAL SET] button
After turning off the power of the camera, turn on the power of the camera while holding down this
button, and wait for around 5 seconds or more without releasing this button. Wait around 2 minutes
after releasing the button. The camera will start up and the settings including the network settings
will be initialized. Before initializing the settings, it is recommended to write down the settings in
advance.
16
Slide cover
Auto back focus button
SP305
SP302
10BASE T/100BASE-TX
ACT
MONITOR OUT
10BASE T/100BASE-TX
ACT
MONITOR OUT
ALC lens connector
ABF
SDCARD LOCK
SP306
Clamp for SDHC/SD memory card
AUDIO OUT
MIC/LINE IN
INITIAL
SET
LINK
SD CARD/ABF
POWER
12V = IN
EXT I/O
GND 4 3 2 1
ALARM IN / DAY/NIGHT IN
ALARM OUT
AUX OUT
AUDIO OUT
MIC/LINE IN
INITIAL
SET
LINK
SD CARD/FOCUS ASSIST(F.A.)
POWER
12V = IN
EXT I/O
GND 4 3 2 1
ALARM IN
AUX OUT
ALARM OUT
W
Lens (option)
W
Tripod mount base
Audio output connector
Microphone/line input connector
INITIAL SET button
Power indicator
12 V DC power supply terminal
SDHC/SD memory card error indicator/
ABF indicator (Blinks when ABF is being
activated)
SP306
SDHC/SD memory card error indicator/
F.A. indicator
(Lights when the focus assist function
is activated or when the focus ring is
positioned near the best focus position.)
SP305
SP302