Panasonic CT-27G23 Manuel - Sayfa 8

TV Panasonic CT-27G23 için çevrimiçi göz atın veya pdf Manuel indirin. Panasonic CT-27G23 16 sayfaları. 27" diagonal stereo monitor-receiver
Ayrıca Panasonic CT-27G23 için: Kullanım Kılavuzu (32 sayfalar), Kullanım Talimatları Kılavuzu (32 sayfalar)

Sayfayı Yazdır

1. Specifications

PICTURE

IN PICTURE

(PIP)

OPERATION

PIP Operation

with a VCR - No Cable Box

This television includes a Picture In Picture (PIP) feature. A second video

source (VCR) is required to provide a second picture.

Connect yourtelevision to a VCR, as shown. (Some models have only one

video input and some models have an S-VIDEO input.).

II A

Incomil_g

Cable

CABLES NOT SUPPLIED

Note:

The Remote Control must be programmed with the supplied codes

to operate the VCR. See Programming the Remote Control in the

Remote Control Quick Reference Guide.

Procedure

Turn the VCR OFF and tune the TV to channel 3.

Press the PIP button on the Remote Control to display the PIP frame

on screen.

Note:

The PIf5 picture is the same as the Main picture, initially.

•

Press the TV/VIDEO button on the Remote Control to select

the VIDEO PIP source.

•

Press the VCR button on the Remote Control and turn ON

the VCR.

•

Press the TM/MCR button on the Remote Control.

•

Choose

channels

for

PIP

frame

pressing

VCR

CHANNEL up/down buttons on the Remote Control.

•

Choose channels for the Main Picture by pressing the TM

button on the Remote Control and using the numeric keypad

or CH up/down buttons.

The SWAP button switches the PIP and Main

Picture source, Press the RECALL button for PIP

and Main Picture source status, on screen.