Aquatic AQ-AD300.2 Kullanıcı El Kitabı - Sayfa 8

Amplifikatör Aquatic AQ-AD300.2 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Aquatic AQ-AD300.2 18 sayfaları. 2 channel waterproof amplifier

Sayfayı Yazdır
CONNECTORS & CONTROLS
The images below list the controls and connectors of the AQ-AD300.2 amplifier.
B
A
J
I
INPUT GAIN ADJUST
A
HIGH LEVEL INPUTS
B
SPEAKER OUTPUTS
C
POWER & GROUND TERMINALS
D

CONNECTORS DEFINED

High level input connector
This connector allows the amplifier to use speaker outputs from a source unit as inputs
to the amplifier.
Wire colors for the high level input cable(s):
High Level Input Cables
Left +
Left -
Right +
Right -
Low level input connector
This connector allows the amplifier to use industry standard RCA outputs from a
standard source unit as inputs to the amplifier. This is the preferred method when RCA
outputs are available, and will produce the cleanest source signal to the amplifier.
We use industry standard 3.5mm headphone style jacks on the amplifier due to the space
constraints (2x 3.5mm phono-jacks are a lot smaller than 4x RCA jacks). Although we highly
recommend using the low level input cables we supply with the kit, technically you should be
able to utilize any standard RCA to Phono adapter cable found at your local electronic store to
make these connections.
USER GUIDE
C
G F
H
AMPLIFIER PROTECTION FUSE
E
POWER & STATUS LED
F
LOW LEVEL INPUT
G
REMOTE TURN-ON TERMINALS
H
White
White with Black strip
Grey
Grey with Black strip
www.aquaticav.com
D
E
CROSSOVER FILTER ADJUST
I
CROSSOVER MODE SWITCH
J
8