Diamondback 1260Sc Kullanıcı El Kitabı - Sayfa 9
Egzersiz Bisikleti Diamondback 1260Sc için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Diamondback 1260Sc 16 sayfaları.
Ayrıca Diamondback 1260Sc için: Kullanıcı Kullanım Kılavuzu (20 sayfalar)
Sayfayı Yazdır
Attach the Saddle and Pedals
Tools: #13 #14 #15 #17
1
Attach the saddle.
Slide the saddle down
onto the seat post and
tighten the nuts on
both sides equally until
firmly secure using the
provided tool.
2
Attach the pedals. Start with the
rider's right pedal (K2). Begin by
finger tightening the pedal onto
the crank arm. Turn the right pedal
CLOCKWISE.
Be sure not to cross thread the
pedal. This could damage the
pedal and crank arm.
Repeat for the left pedal (K1).
However, turn the left pedal in
COUNTER-CLOCKWISE direction.
After finger tightening as far
as possible, finish with the tool
provided, making sure both pedals
are fully seated and tight against
the crank arm.
1260Sc Owner's Manual
Parts:
G : Saddle
K1 : Left Pedal
G
K1 - LEFT:
Counter-clockwise
Rotation
K2 : Right Pedal
K2 - RIGHT:
Clockwise Rotation
9