Aquatic Digital Media Locker AQ-DM-6BT Kullanım ve Kurulum Kılavuzu - Sayfa 3

İç Mekan Mobilyaları Aquatic Digital Media Locker AQ-DM-6BT için çevrimiçi göz atın veya pdf Kullanım ve Kurulum Kılavuzu indirin. Aquatic Digital Media Locker AQ-DM-6BT 16 sayfaları. Digital media locker for bluetooth & mp3 devices
Ayrıca Aquatic Digital Media Locker AQ-DM-6BT için: Kullanım ve Kurulum Kılavuzu (15 sayfalar)

Sayfayı Yazdır

Getting Started

Digital

Me~Jja

Locker AQ-DM-88T

1.1 Contents

• AQ-DM-6BT Digital Media Locker

• Jack Cable (3.5mm· Female to 3.5mm Male)

• Wiring Harness (AQ-UNH-2)

• Six (6) Stainless Steel Mounting Screws

• Mounting Template

• User/Installation Manual

1.2 Connections (see Diagram 1.2.1}

1. 12-pin Watertight Harness

The 12-pin harness suppl4es power and ground connections to the Digital Media Locker

and four

(4)

speaker channel output connections from the Digital Media Locker (see Wiring

Diagram 1.3.1 on page

4).

Do not cut or modify the 12-pin harness on the BlueCube side or warranty will be

void.

2. Auxiliary Outputs

Allows external amplifiers to be connected to power additional

speakers.

3. Remote 8-pin DIN Cable (x2)

Allows connection of the optional wired and wireless Remote Controls (sold separately).

4. 12V DC External Trigger (x2)

Allows for external lighting or relays to be triggered (2A max load). This feature is only

available when using the optional Remote Control (sold separately).

5. Bluetooth Halo Aerial Connector

Connect the Bluetooth

Halo Aerial Technology

Antenna (AQ-BTANT-1) to the male SMA

connector. Do not apply excessive torque on the SMA connector (no more than 0.5N-m).

Use

hands to tighten the connection (do not use a wrench).

Aquatic AV does not recommend the wired Remote Control (AQ-WR-6F) for use in spa

applications.