Panasonic SA-DT310 Kullanım Talimatları Kılavuzu - Sayfa 27
Stereo sistemi Panasonic SA-DT310 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Panasonic SA-DT310 40 sayfaları.
Sayfayı Yazdır
Sound field
AV SYSTEM
SLEEP
TV/AV
DOUBLE
RE-MASTER
1
GROUP
4
REPEAT/
MIX 2CH
MIX 2CH
7
PLAY MODE/
P.MEMORY CANCEL
SKIP
CH
TOP MENU
DIRECT
NAVIGATOR
3, 4, 2, 1
ENTER
ENTER
DISPLAY
TV VOL s
VOLUME
MUTING
C.S.M
FL DISPLAY AUDIO ONLY C.FOCUS
RDS
FM MODE
CH SELECT
SETUP
CH SELECT
You may experience a reduction in sound quality when these sound
field systems are used with some sources. If this occurs, turn the
sound field system off.
Dolby Digital and DTS
≥Dolby Digital and DTS are digital encoding systems used on DVD
to carry surround sound. Both were originally developed for use in
cinemas.
≥This unit automatically recognizes and decodes these systems.
Software encoded with
Dolby Digital can be iden-
tified with this mark.
Play a Dolby Digital or DTS source.
The Dolby Digital or DTS indicator lights.
DIGITAL
DTS
∫ To down-mix Dolby Digital or DTS (multiple
channel) signals to 2 channels
While stopped
MIX 2CH
Press [MIX 2CH].
To cancel, press [MIX 2CH] again.
≥During play, pressing and holding the button also turns the setting
on and off. (Press and hold again to cancel the setting.)
When "D.MIX" is flashing [DVD-A]
The DVD-Audio contains multiple-channel signals that cannot be
down-mixed.
All manuals and user guides at all-guides.com
TV
VCR
AUX
EXT
TUNER
DVD
DVD
BAND
CD
2
3
5
6
8
9
--
S10/-
/
0
SLOW/SEARCH
MENU
PLAY LIST
RETURN
VOLUME
TV VOL r
s r
SUBWOOFER
SUBWOOFER
PL
LEVEL
LEVEL
PLII
SFC
TEST
DELAY TIME
TEST
Software encoded with DTS can
be identified with this mark.
Dolby Pro Logic II
The Dolby Pro Logic II processor works not only on sources
recorded with Dolby Surround, but also on any stereo source.
1
Press [ÎPLII].
Each time you press the button:
MOVIE>MUSIC>OFF
^------------------------------------}
MOVIE: Use this mode when playing movie software,
especially video tapes, recorded in Dolby Surround.
MUSIC: Adds surround effects to stereo sources.
2
Play a Dolby Surround or stereo
source.
Note
This feature does not work for some discs.
Speaker level adjustments
Adjust the level of the speakers so they are the same apparent
level as the front speakers where you would normally be sitting and
listening (L, R ➡ below).
Preparation
Press [DVD].
1 While stopped
Press [TEST] to output a test signal.
Lch: Front left
Cch: Center
Rch: Front right
RSch: Right surround
LSch: Left surround
2 Press [VOLUME, r] or [s] to set the volume level normally
used for listening.
3 Press [3] (to increase) or [4] (to decrease).
C, RS, LS: j6 dB to i6 dB
To stop the test signal, press [TEST] again.
∫ To adjust speaker level during play
1 Press [CH SELECT] to select the speaker.
L, Rch>Cch>RSch>LSch>SWch
^————————————}
SWch: Subwoofer
≥You can only adjust SWch if the disc includes a subwoofer
channel.
2 Press [3] (to increase) or [4] (to decrease).
L, R:
(➡ below)
C, RS, LS: s6 dB to r6 dB
SW:
s10 dB to r10 dB
Balance
You can adjust the balance of the front speakers.
1 Press [CH SELECT] to select "L" or "R".
2 Press [2, 1].
≥When testing signal, you can also adjust the "L" or "R" balance of
the front right and left speakers by pressing [2, 1].
Note
You can adjust subwoofer level by pressing [SUBWOOFER LEVEL].
PL
27
RQT6924