Axminster 104356 Kullanım Kılavuzu - Sayfa 2
Aksesuarlar Axminster 104356 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Axminster 104356 2 sayfaları. Tooling stylus tip ballpoint pen kit - chrome
ASSEMBLY, HINTS & TIPS
1. Layout parts according to diagram A,
ensuring the turned Pen Barrels are the
same orientation as when mounted on
the mandrel.
Note: When removing the blanks from
the mandrel, use a felt tip pen to mark
the inside of each tube where they join to
maintain the grain or pattern alignment.
2. Press the Clip/Stylus Assembly into the
top of the (shorter) Upper Pen Barrel.
DIAGRAM A
Visit the Knowledge blog 'How To Make A Pen' for hints, tips and videos
knowledge.axminstertools.com/pen-turning
V I E W O U R F U L L R A N G E O F
P E N C A S E S A N D D I S P L A Y B O X E S O N L I N E
3. Press the Threaded Insert into the
bottom of the (shorter) Upper Pen
Barrel.
4. Screw the Screwdriver (tool end first)
into the Threaded Insert.
5. Press the top of (longer) Lower Pen
Barrel onto the back end of the
Screwdriver.
6. Screw the Refill into the Nib.
Axminster Tools, Axminster, Devon, EX13 5PH
A X M I N S T E R T O O L S . C O M
8. Push the Nib into the bottom of the
(longer) Lower Pen Barrel.
Tips/Hints
• Use a woodworking vice, one handed bar
clamp, arbor press or a dedicated pen
press.
• Press parts together slowly and steadily
• When pressing the parts together,
CHECK the parts are correctly aligned
with each other and straight. If the part
is crooked or misaligned, it will result in
a poor fit or render the pen unuseable.
• When laying out your pen barrel with
the parts, pay careful attention to keep
the pen barrels in the same orientation
as when on the mandrel. i.e. a pen
barrel may have a "top" and "bottom",
now is the time to be certain of the
orientation.