Alphatech BlueGate A Kullanıcı Kılavuzu - Sayfa 9

Ağ Geçidi Alphatech BlueGate A için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Alphatech BlueGate A 17 sayfaları. Gsm gateway

Notes to each feature

11-19 When you have set some fix-numbers (default is 060, it

is GSM operators in Czech republic) through BLUE

GATE will dial only numbers starting at this fix-number.

At the others received busy tone. When memories will

be empty the calling wont be restricted.

Rewriting of memory – by storing of new fix-numbers

are old fix-numbers erased.

Erasing of memory - Memory you will erase by storing

of „nothing". You

dial only number of memory which you want erase and

confim it.

The set of this feature is suitable at PBX which detect

breakdown on the line. As the line is detected as

breakdown then extensions are not connected on its.

Very important feature is acknowledge character

setting. Default is #. When is # used for PBX features

you can change it on *.

An analogue phones are not enable send „+„ which is

very used in GSM. In this case is possible to use

combination „00„ to send it to mobile phone.

This feature identificated connection of BLUE GATE to

external line at some type of PBX (ex.:Siemens Hicom).

The GSM phones requested command to connection on

32,35

inserted number. The BLUE GATE will send a

command immediately after acknowledge character

dialling (#).

- - 8