ABB ACS150 series Kurulum Talimatları

Kontrolör ABB ACS150 series için çevrimiçi göz atın veya pdf Kurulum Talimatları indirin. ABB ACS150 series 2 sayfaları. Mirco drives
Ayrıca ABB ACS150 series için: Kullanıcı Kılavuzu (14 sayfalar), Kurulum Talimatları (4 sayfalar), Hızlı Kurulum ve Başlatma Kılavuzu (2 sayfalar), Hızlı Kurulum ve Başlatma Kılavuzu (2 sayfalar), Kurulum Talimatları (4 sayfalar)

ACS350 and ACS150

MUL1-R3 Installation Instructions

WARNING! Before installing MUL1-R3

option, read the safety instructions and

mechanical and electrical installation

instructions in the drive user's manual.

Follow the instructions when installing,

operating and servicing the drive. If

ignored, physical injury or death may

follow, or damage may occur to the

drive, motor or driven equipment.

3. If using FPBA-01 or FCAN-01 option module, remove part

from gland box frame by bending it.

1. Fasten the gland box frame to drive with two M4×12 screws.

4. If control cables or fieldbus option modules will be installed,

remove the detachable lid (4) from the gland box cover.

2. Fasten the gland box frame to wall with four M4 screws (not

included).

5. With any fieldbus option module except FRSA-00, install the

option grounding plate to the gland box frame. See Mechanical

installation in the drive manual.

3AFE68620023 rev. B / 7.12.2005