Accurex Temperature Interlock Kurulum, Kullanım ve Bakım Kılavuzu

Kontrolör Accurex Temperature Interlock için çevrimiçi göz atın veya pdf Kurulum, Kullanım ve Bakım Kılavuzu indirin. Accurex Temperature Interlock 12 sayfaları.

Sayfayı Yazdır

Installation, Operation and Maintenance Manual

Please read and save these instructions for future reference. Read carefully before attempting to assemble, install,

operate or maintain the product described. Protect yourself and others by observing all safety information. Failure

to comply with these instructions will result in voiding of the product warranty and may result in personal injury

and/or property damage.

Product Speciﬁcation

Temperature Interlock

International Mechanical Code (IMC) 2015 Section

507.1.1 compliant electrical package.

Provide Accurex, LLC temperature interlock electrical

package as shown on plans and in accordance with the

following speciﬁcation:

The temperature interlock(s) consists of a time delay

relay, adjustable thermostat, junction box, ﬁre proof/

leak proof threaded ﬁtting (Evergreen Quik-Seal® and/

or Evergreen Compression Seal), and shall be a self-

contained unit or as part of another pre-engineered

electrical control package.

The temperature interlock package shall close a time

delay relay powering the fans when the set temperature

is reached at the thermostat. The interlock shall hold the

circuit closed upon fan switch being turned off until the

temperature at the sensor decreases below the set point

at which point the timed relay will begin a countdown.

Once the countdown has expired and as long as the

temperature has remained below the set point, the fans

shall shut down.

The temperature interlock package shall be constructed

by Accurex, LLC and operate in accordance with

International Mechanical Code.

Due to continuous research, Accurex, LLC reserves the

right to change speciﬁcations without notice.

General Safety Information

Only qualiﬁed personal should install this product.

Personnel should have a clear understanding of these

instructions and should be aware of general safety

precautions. Improper installation can result in electric

shock and other potential hazards.

1. Follow all local electrical and safety codes, as well as

the National Electrical Code (NEC) and latest edition

of the National Fire Protection Agency Standard for

Ventilation Control and Fire Protection of Commercial

Cooking Operations (NFPA 96). Follow the Canadian

Electrical Code (CEC) and ULC-S650 if installing this

product in Canada.

2. Do not allow the electrical components of this

product to come in contact with oil, grease, hot

surfaces, water, or chemicals.

3. Verify the site can supply the necessary power for

each fan and for the control panel.

WARNING

Electrical shock hazard. Can cause equipment

damage, personal injury or death. Service must only

be performed by personal that are knowledgeable in

the operation of the equipment being controlled.

CAUTION

Always disconnect power before working on or near

the product. Lock and tag the disconnect switch or

breaker to prevent accidental power up.

CAUTION

It is the responsibility of the installer to make sure both

electrical and gas appliances shut down in the event

of a fire or in the event of a power loss to the building

when this sequence is required by the authority having

jurisdiction.

Document 473592

Temperature Interlock