Accurex Temperature Interlock Kurulum, Kullanım ve Bakım Kılavuzu - Sayfa 7

Kontrolör Accurex Temperature Interlock için çevrimiçi göz atın veya pdf Kurulum, Kullanım ve Bakım Kılavuzu indirin. Accurex Temperature Interlock 12 sayfaları.

Sayfayı Yazdır

Calibration

Thermostat is preset by factory to

95°F (35°C) and has a slow make

and break contact. It will make

contact on a temperature rise and

break contact on temperature

fall. The temperature set point

may have to be adjusted slightly

depending of both ambient

and cooking conditions. The

adjustment knob is located on

the back of the thermostat. Use a

small blade screwdriver to make the adjustments.

1. Turn counterclockwise to increase the temperature

set point, turn clockwise to decrease the

temperature set point.

2. Quarter revolution in either direction corresponds to

a 22.5°F (-5.3°C) adjustment. Be sure to make small

adjustments, about 1/16 of a turn (≈6°F) or less at

one time.

3. Do not exceed more than one-half revolution in either

direction.

4. Check system operation before making additional

adjustments.

Adjustment

Screw

Temperature Interlock