Epson C203011-B - Stylus Color 3000 Inkjet Printer Manuel - Sayfa 6
Yazıcı Epson C203011-B - Stylus Color 3000 Inkjet Printer için çevrimiçi göz atın veya pdf Manuel indirin. Epson C203011-B - Stylus Color 3000 Inkjet Printer 13 sayfaları. Epson stylus color 3000: product information
Ayrıca Epson C203011-B - Stylus Color 3000 Inkjet Printer için: Hızlı Kurulum Kılavuzu (21 sayfalar), Broşür ve Teknik Özellikler (2 sayfalar)
Sayfayı Yazdır
EPSON Stylus COLOR 3000
Lights
Operate
Paper Out
S
B
Ink Out
Yellow
B
Magenta
B
Cyan
B
Black
Pause
Plain Paper
360 DPI Ink Jet Paper
Photo Quality Ink Jet
Paper
Photo Quality Glossy
Film
Ink Jet Transparencies
Other/Media Selection
Off
All the lights
6 - EPSON Stylus COLOR 3000
The
light is on when the
Operate
printer is on. When the
Operate
light flashes, the printer is
receiving data. It may also flash
with other lights during certain
operations or error conditions.
When the
light comes
Paper Out
on, your paper ran out or is
loaded incorrectly, or the paper-
release lever is set to the wrong
position. Load paper, check the
lever position, and then press the
or
button to
Pause
Load/Eject
turn off the light.
When the
light flashes,
Paper Out
you have a paper jam. Turn off
the printer and gently pull out all
jammed paper and reload the
paper.
When an
light flashes,
Ink Out
your ink supply is low. Make sure
you have a replacement cartridge.
When an
light comes on,
Ink Out
you need to replace the ink
cartridge.
When the
light is on,
Pause
printing is paused. Press the
button to resume.
Pause
When the
light flashes,
Pause
your printer is charging ink,
cleaning the print heads, or
performing another operation.
The Media Type light indicates
which media you selected with
the Media Type button. When
you print, the printer software
checks the software setting and
this selection to see if they match.
If they do not match, an error
message appears on your screen. If
you do not want to use this
feature or your media is not listed,
select
Other/Media Selection
.
Off
When all the lights flash, your
printer may have an internal
error.
Buttons
Operate P
LF/FF
Load/Eject
Pause/Reset
Micro Adjust D
Micro Adjust U
Cleaning B
Cleaning A
Media Type
Note:
The Media Type setting only works when printing from the paper
tray with Windows 95 or Macintosh.
5/97
Turns the printer on and off.
Feeds paper line by line. Loads a single
sheet or advances continuous or banner
paper to the next top-of-form position
if held down.
When paper is not loaded, loads a sheet
of paper or a single sheet of continuous
paper.
When paper is loaded, ejects a sheet of
paper. Feeds continuous paper
backward to the paper-park position.
Ejects banner paper backward. Feeds
continuous or banner paper to the tear-
off position when pressed after printing
and Auto tear-off mode is set to off in
default-setting mode.
Stops printing temporarily. Resumes
printing when pressed again.
Clears the printer buffer if pressed for
five seconds.
Adjusts the loading position or tear-off
position for continuous paper. Press
the
D
button to feed
Micro Adjust
paper forward or press
Micro Adjust
to feed paper backward.
Micro Adjust settings are saved in the
printer's memory.
Starts the black print head cleaning
cycle if pressed for three seconds. See
"Cleaning the Print Heads" on
page 10.
Starts the color print head cleaning
cycle if pressed for three seconds. See
"Cleaning the Print Heads" on
page 10.
Determines whether the Media Type
setting you selected in the printer
driver matches the type of media
loaded in the printer.
If paper is loaded and the Media Type
lights flash, the paper-release lever is
not in the correct position. Match the
paper-release lever position with the
media type and paper source you are
using.
U