Ayra WSM Black 01 Kullanıcı Kılavuzu - Sayfa 9

Sis Makinesi Ayra WSM Black 01 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Ayra WSM Black 01 18 sayfaları. Dmx fog machine

Remote control units

The WSM Black fog machines are equipped with various option for

operation on a distance. The user can choose between three ways of

remote control, each with its own characteristics. This way, the user is

able to choose the right operating mode for any occasion. The third way

of operation, not covered below, is through DMX. This will be explained

later on in this user manual.

The wired timer-remote consists of a device with three rotaries, three

pressing buttons and three LED indicators. This remote is equipped with

a solid connection cable and can be connected to the designated

'remote control' input on the fog machine.

- Interval min - max: Minimum and maximum time of the interval (the

waiting time in between two moments of fog output projection), variable

setting

- Duration min - max: Minimum and maximum time of the fog production

(how long should the fog machine produce fog), variable setting

- Output min - max: minimum and maximum output of the fog machine

for each fog production period of time, variable setting

- yellow LED indicator: status LED for activation timer-function, turned

on when illuminated

- red LED indicator: status LED for activation continuous mode, turned on when illuminated

- green LED indicator: fog machine heater status LED, ready to produce fog when illuminated

- yellow button: timer function on or off

- red button: continuous mode on or off

- green button: manual production of fog based on the set fog machine output level (push and hold)

The WSM Black fog machines have a built-in receiver for the wireless remote. This is a

handheld device, in a key chain sized housing, equipped with a protection cover to avoid

unwanted button pushing.

The remote has an extractable antenna and works on the 433 MHz frequency band,

which ensures that aiming the remote correctly is of less importance to achieve optimal

result compared to infrared remotes. This way the machine can be operated easily on

distance. Both buttons on the remote trigger 100% output from the machine and with a

LED indicator the user knows that the signal is being sent out from the transmitter. Large

objects being positioned between the transmitter and receiver, may alter the operating

range of the remote (such as audience or concrete walls).

Keep in mind that the transmitter and receiver are not connected with an unique ID, so

any transmitter is able to send signals to multiple or different WSM Black series machines.

The remote comes with an A23 type 12V battery (L1028 / LR23A).

The information in this user manual is subject to change at any time without notice.

Version: 1.0

Date of creation and author's initials: 29-07-2017 RV

Revision date and author's initials: -