Cisco 4506 - Catalyst Switch Genel Bakış - Sayfa 38
Anahtar Cisco 4506 - Catalyst Switch için çevrimiçi göz atın veya pdf Genel Bakış indirin. Cisco 4506 - Catalyst Switch 46 sayfaları. Promotional bulletin
Ayrıca Cisco 4506 - Catalyst Switch için: Açıklama (2 sayfalar), Nasıl Yapılır Kılavuzu (2 sayfalar), Veri Sayfası (23 sayfalar), Ürün Destek Bülteni (4 sayfalar), Tamamlayıcı Kılavuz (3 sayfalar)
Sayfayı Yazdır
Gigabit Ethernet Switching Modules
WS-X4524-GB-RJ45V
Figure 1-35 WS-X4524-GB-RJ45V 24-Port IEEE-Compliant PoE 10/100/1000BASE-T Switching Module
Catalyst 4500 Series Module Installation Guide
1-38
The WS-X4524-GB-RJ45V 24-port IEEE 802.3af-compliant PoE
10/100/1000BASE-T RJ-45 switching module (see
specifications:
Specification
Module type
Port duplex mode
Port speed
Number of ports
Connector type
Cable type
Power over Ethernet
To provide PoE with the 24-port PoE 10/100BASE-TX switching module in a
Catalyst 4006 switch, you must have a power entry module (PEM) and a power
shelf installed. The Catalyst 4006 switch can provide 312 W per PoE module to
powered devices. If the powered devices are using the maximum 15.4 W per port,
there is only enough power for 18 powered devices. If the powered devices are
using less than 15.4 W per port, more powered devices can be powered, up to the
312 Watt maximum. For more information about installing the PEM or the
external power shelf, refer to the Catalyst 4000 Series Installation Guide,
Catalyst 4500 Series Installation Guide, Installation and Configuration Note for
the Catalyst 4500 Series AC Power Shelf, or the Catalyst 4500 Series Power Entry
Module and External Power Shelf Installation Note.
Chapter 1
Description
10/100/1000BASE-T Fast Ethernet switching module
with IEEE802.3af PoE
Half or full duplex mode
10, 100, or 1000 Mbps
24
RJ-45 (See
Figure 2-1 on page
UTP
Up to 15.4 W per powered device on all 24 ports
(to a 312 W total on the Catalyst 4006)
Module Overview and Specifications
Figure
1-35) has the following
2-2.)
78-13267-06