Cisco Aironet 350 Series Hızlı Başlangıç Kılavuzu - Sayfa 8

Anahtar Cisco Aironet 350 Series için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Cisco Aironet 350 Series 12 sayfaları. Managed switches
Ayrıca Cisco Aironet 350 Series için: Hızlı Başlangıç Kılavuzu (12 sayfalar), Sürüm Notları (14 sayfalar), Hızlı Başlangıç Kılavuzu (16 sayfalar), Hızlı Başlangıç Kılavuzu (12 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar), Manuel (10 sayfalar), Tanıyalım (16 sayfalar), Hızlı Başlangıç Kılavuzu (5 sayfalar)

Installing Utilities

After you have installed the appropriate driver for your system, you can install the Aironet

Client Utilities (ACU), Link Status Meter (LSM), and Client Encryption Manager (CEM)

utilities. Installing utilities is optional unless using Wired Equivalent Privacy (WEP) in your

network. If WEP is enabled, all devices in the network must have the same WEP code, which

you set using the CEM utility. The ACU and LSM utilities provide troubleshooting and status

information, but are not required.

Refer to Using the Cisco Aironet 350 Series PC Card Client Adapters on the on the Client

Adapter CD for instructions on how to use each utility.

Insert the CD-ROM for your operating system into your computer CD-ROM drive.

Select Start > Run and enter the following path (where D is the letter for your CD-ROM

drive): D:\utils\setup.exe

Follow the setup instructions on the screen to complete the installation.

Note: After you have installed the appropriate driver and utilities, contact your IS department

if you have a problem connecting to the network.