AccuStream Abrasive Regulator II Manuel - Sayfa 8

Kontrolör AccuStream Abrasive Regulator II için çevrimiçi göz atın veya pdf Manuel indirin. AccuStream Abrasive Regulator II 10 sayfaları.

Sayfayı Yazdır
AccuStream Cutting Systems
6

Disassembly and Reassembly

The valve and metering area of the regulator
should not normally require maintenance. In
the event that this area does require
disassembly, the orientation of the parts during
reassembly must be correct.
On the assembly drawing cut-out, (right) note
the location and thickness of Sandwich plate
and the Exit plate. The 0.50 dimensions and
plate thickness will determine the orientation
and placement of both parts.
13096 Abrasive Regulator II Manual