Digisol RANGER SERIES Hızlı Kurulum Kılavuzu - Sayfa 11
Kablosuz Yönlendirici Digisol RANGER SERIES için çevrimiçi göz atın veya pdf Hızlı Kurulum Kılavuzu indirin. Digisol RANGER SERIES 16 sayfaları. 2.4ghz ge outdoor access point with poe
Ayrıca Digisol RANGER SERIES için: Hızlı Kurulum Kılavuzu (12 sayfalar)
Sayfayı Yazdır
Getting Started
Software Preparation:
Most computers are connecting to a local network with dynamic IP (DHCP) setting.
To access the web UI of the device, you have to change your computer‟s TCP/IPv4
settings into a static IP setting for the Ethernet Interface.
The device‟s default IP address is 192.168.123.50, and your computer must be
assigned with a 192.168.123.x IP address to get access to the device.
Set the TCP/IPv4 address of your computer to 192.168.123.25, and subnet mask
to 255.255.255.0.
After applying this setting, you can now access the web UI for configuring the
device.
Easy Setup via Web UI
You can browse web UI to configure the device. Firstly you need to launch the
Setup Wizard browser first and then the Setup Wizard will guide you step-by-step
11