Sharp Notevision PG-M10S Kullanım Kılavuzu - Sayfa 36
Projektör Sharp Notevision PG-M10S için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Sharp Notevision PG-M10S 49 sayfaları. Digital multimedia projector
Ayrıca Sharp Notevision PG-M10S için: Kullanım Kılavuzu (49 sayfalar), Temel Bilgiler & Hazırlıklar (10 sayfalar)
Sayfayı Yazdır
Setting the Menu (Option)
Selecting the Menu Language
Any one of eight different languages can be selected for
menu displays.
1
With the FLIP COVER of the remote control
open, press the MENU button to display the
Advanced menu, then use the cursor
keys to select "OPTION".
2
When "OPTION" menu is displayed, use the
cursor
/
keys to select "LANGUAGE",
then press the ENTER button.
3
Use the cursor
the following languages.
GEnglish
GSwedish
GGerman
GSpanish
GFrench
GChinese
GItalian
GJapanese
Setting the Menu Display Position
The menu display position can be set with this function.
1
With the FLIP COVER of the remote control
open, press the MENU button to display the
Advanced menu, then use the cursor
keys to select "OPTION".
2
When "OPTION" menu is displayed, use the
cursor
/
keys to select "MENU
POSITION" and then press the ENTER
button.
3
Use the cursor
display position.
Menu Viewing Settings
The menu viewing method can be set with this function.
1
With the FLIP COVER of the remote control
open, press the MENU button to display the
Advanced menu, then use the cursor
keys to select "OPTION".
2
When "OPTION" menu is displayed, use the
cursor
/
keys to select "MENU TYPE".
3
Use the cursor
"TRANSLUCENT" or "OPAQUE".
34
/
/
keys to select one of
/
/
,
/
keys to set the
/
/
,
/
keys to select
Other Menu Settings
The time that the menu is displayed on the screen can be
set with this function.
1
With the FLIP COVER of the remote control
open, press the MENU button to display the
Advanced menu, then use the cursor
keys to select "OPTION".
2
When "OPTION" menu is displayed, use the
cursor
/
keys to select "DISPLAY
TIME".
3
Use the cursor
from 5 sec. to 30 sec.
On-screen Display
This function is set to "ON" at the factory. When set to "ON",
input will be projected onto the screen when the input is
switched with the remote control button. Also, the input
menu will be displayed when the power is turned on to
indicate the selected input. In addition, status is displayed
on the menu bar when "FREEZE", "MUTE", "ENLARGE",
"KEYSTONE" or "VOLUME" is set.
1
With the FLIP COVER of the remote control
open, press the MENU button to display the
Advanced menu, then use the cursor
keys to select "OPTION".
2
When "OPTION" menu is displayed, use the
cursor
/
keys to select "ON SCREEN".
3
Use the cursor
"OFF".
To close the menu
Press the R-CLICK/EXIT button.
/
/
keys to set a value
/
/
keys to set "ON" or