Siemens SMI53E05GB/98 Kullanım Kılavuzu - Sayfa 29

Bulaşık Makinesi Siemens SMI53E05GB/98 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Siemens SMI53E05GB/98 42 sayfaları.

Sayfayı Yazdır

Fault

A different error code is

indicated on the digital

display.

( :

to :

)

Display flashes.

Refill indicator for salt @

and/or rinse-aid H is lit.

Refill indicator for salt @

and/or rinse-aid H is not

lit.

Water is left in the

appliance at the end of the

programme.

Cause

A technical fault has probably

occurred.

Door not closed properly.

No rinse aid.

No salt.

Sensor does not detect salt

tablets.

Refill indicator switched off.

There is still enough special salt/

rinse aid available.

Filter system or area under the

filters 1Z is blocked.

Program has not ended yet.

Fault, what to do?

Remedial action

Switch off appliances with the ON/OFF

switch (. After a short time restart the

appliance.

If the problem recurs, turn off the tap and

pull out the mains plug.

Call customer service and mention the error

code.

Close the door. Ensure that no objects

(utensil, fragrance dispenser) are protruding

over the basket and preventing the door

from closing.

Refill rinse aid.

Refill with special salt.

Use different special salt.

Activation/deactivation (see chapter Water

softening system/Special salt or Rinse aid).

Check refill indicator, levels.

Clean filters and area underneath (see

"Waste water pump").

Wait until programme ends or reset (see

"Terminating the programme").