Siemens SN 56M531 Kullanım ve Güvenlik Talimatları - Sayfa 20
Bulaşık Makinesi Siemens SN 56M531 için çevrimiçi göz atın veya pdf Kullanım ve Güvenlik Talimatları indirin. Siemens SN 56M531 28 sayfaları.
Sayfayı Yazdır
en
... when the appliance is
switched on
The appliance does not start.
The mains fuse has tripped.
The appliance plug has not been
inserted.
The appliance door has not been
shut properly.
... on the appliance
Lower spray arm rotates sluggishly.
Spray arm blocked.
... changing settings
A setting cannot be changed,
a programme starts.
Wrong programme button pressed.
Terminate the programme
(see chapter entitled "Terminating
the programme (Reset)") and start
all over again.
You did not wait until programme
ended.
Cover on the detergent dispenser
cannot be closed.
Detergent dispenser overfilled
or mechanism blocked by sticky
detergent residue.
Detergent residue in the detergent
dispenser.
Dispenser was damp when filled.
20
Downloaded from DishWasher-Manual.com Manuals
"check water supply"
lights up.
Tap turned off.
Water supply interrupted.
Supply hose kinked.
Filter in the water supply blocked.
Switch off the appliance and
pull out the mains plug.
Turn off the tap.
Clean filter in the supply hose.
Reconnect power supply.
Turn on the tap.
Switch on the appliance.
Water is left in the appliance
at the end of the programme.
(E24) Waste water hose is
blocked or kinked.
(E25) Waste water pump
blocked, cover on the waste
water pump is not locked in
position (see Maintenance
and Care).
Filters blocked.
The programme has not yet
ended. Wait until programme
ends (digital display indicates
0:00) or implement the "Reset"
function.
Refill indicator for salt
rinse-aid
is not lit.
9
Refill indicator/s switched off.
Adequate salt/rinse-aid available.
display
7
and/or
8