Ricoh 2555 Sistem Ayarları - Sayfa 18

Hepsi Bir Arada Yazıcı Ricoh 2555 için çevrimiçi göz atın veya pdf Sistem Ayarları indirin. Ricoh 2555 27 sayfaları. Savin copier operating instructions

Sayfayı Yazdır

User Tools (System Settings)

ADF Orig. Ejection

<F/F4>Size Setting

Basic Page 2

System Reset

Function Priority

Description

As a default setting, the scanned originals from the docu-

ment feeder are ejected to the ADF external tray. If there is

no space to attach an ADF external tray, you can change the

output tray to the ADF tray. However, if the output tray is

set to the ADF tray, it takes a little more time than to the

ADF external tray.

Note

Default: ADF Ext. Tray

Even if the ADF external tray is set, papers are ejected to

the ADF tray in 2 Sided

Currently three types of F size are available; 8

13" and 8"

13".

The document feeder or platen cover sensor cannot distin-

guish these 3 types of originals.

This function sets the F size from the document feeder or

platen cover sensor.

Auto Paper Select or Auto Reduce/Enlarge can be used for

F size originals based on this setting.

Note

Default: 8

13" L

Description

If no operation is performed for a selected time after inter-

rupt copying, the interrupt copying will be canceled. This

function is called "System Reset". The time can be set from

10 to 999 seconds, or 0.

Note

Default: 60sec.

When the time is set to "0", System Reset will not be ac-

tivated.

You can specify the mode that is displayed when the opera-

tion switch is turned on or System Reset is activated.

Note

Default: Copy

2 Sided copy mode.

" 13", 8