Ricoh Pro C900s Kullanıcı Eki

Yazıcı Ricoh Pro C900s için çevrimiçi göz atın veya pdf Kullanıcı Eki indirin. Ricoh Pro C900s 24 sayfaları. Color server options
Ayrıca Ricoh Pro C900s için: Teknik Özellikler (6 sayfalar), Özellikler Kılavuz (27 sayfalar), Broşür ve Teknik Özellikler (8 sayfalar), Kurulum Kılavuzu (24 sayfalar), Kullanıcılar İçin Notlar (2 sayfalar), Güvenlik Bilgileri Kılavuzu (12 sayfalar)

Sayfayı Yazdır
Ricoh Pro C900s Kullanıcı Eki
Option and settings
Destination
With one stacker installed:
System's Default/
Stacker Tray/
Stacker Upper Tray
With two stackers installed:
System's Default/
Stacker Tray/
Second Stacker Tray/
Stacker Upper Tray
With one Stacker and the
Finisher SR5000 installed:
System's Default/
Stacker Tray/
Finisher Shift Tray/
Finisher Upper Tray
With two Stackers and the
Finisher SR5000 installed:
System's Default/Stacker Tray/
Second Stacker Tray/Finisher
Shift Tray/Finisher Upper Tray
Copyright 2008 © Electronics for Imaging, Inc.
User Addendum
Color Server Pro C900/C900s, version 3.0
This document contains information about options for the finisher units installed with the
Color Server Pro C900/C900s, version 3.0. These finishers include:
• Stacker
• Booklet Processor
• Multi-hole Punch Unit
• Ring Binder
In the following tables, underlined settings indicate the default setting for an option. If you do
not choose another option, the finisher uses the underlined setting. These options are set on
the Finishing tab of the printer driver Preferences dialog box.
Stacker settings
The following Destination settings apply to all of the finisher trays installed with your Color
Server Pro C900/C900s. Depending on your finisher configuration, some options are not
available.
For details about output tray settings when a second stacker is installed, see the System
Settings command in the User Tools menu on the copier's display panel.
Description
Sets the output tray location.
System's Default uses the default Color Server
Pro C900/C900s setting, and is not affected
by different finisher configurations.
Finisher Upper Tray refers to the upper tray
of the Finisher SR5000.
Finisher Shift Tray refers to the lower tray of
the Finisher SR5000.
Requirements, constraints, and information
If one Stacker and the Finisher SR5000 unit
are installed at the same time, the only
available Upper Tray is the Finisher Upper
Tray.
The Stacker Upper Tray is unavailable if a
Finisher SR5000 unit is installed. (The
Finisher Upper Tray is available instead.)
Part Number: 45081366
2 December 2008