Ricoh Pro L5130e Manuel - Sayfa 4

Yazıcı Ricoh Pro L5130e için çevrimiçi göz atın veya pdf Manuel indirin. Ricoh Pro L5130e 12 sayfaları. Additional function 2
Ayrıca Ricoh Pro L5130e için: Ayarlar Kılavuzu (44 sayfalar)

Sayfayı Yazdır

Added Display of Print Remaining Time and Length

Added Display of Print Remaining Time

and Length

Checking Print Remaining Time and Length

[Overview]

Added the new function to display the print remaining time and length on the control panel.

[How to operate]

⚫

Print Remaining Time

The print remaining time is displayed on the top screen of the control panel. It alternates

with "Operational status or messages" when the printer is in the "Printing" or "Drying"

state.

Note:

It shows the total remaining time including the printing and the drying after printing.

Also, it shows in minutes for up to 99 hours and 59 minutes.

It shows the remaining time for one job currently being printed. Even if multiple jobs

are queued in RIP such as "Continuous Printing", the total remaining time of all jobs

cannot be displayed.

This print remaining time is an approximate guideline and may not necessarily match

the actual time.

(e.g.)



If the data transmission to the printer is delayed due to the network

environment or the RIP PC performance, the actual printing time will be longer

than the displayed time.



If "Skip White Space" or "Skip White Areas" is set to "ON", the actual printing

time will be shorter than the displayed time. It can be work by changing the

RIP settings. For details, please refer to the separate "RIP Settings Guide".