Ricoh SP 150SUw Wi-Fi Bağlantı Kılavuzu - Sayfa 6
Yazıcı Ricoh SP 150SUw için çevrimiçi göz atın veya pdf Wi-Fi Bağlantı Kılavuzu indirin. Ricoh SP 150SUw 16 sayfaları.
Ayrıca Ricoh SP 150SUw için: Kurulum Kılavuzu (2 sayfalar)
12. Select the printer from the list, and click [Next].
The installation starts.
13. After the completion message appears, click [Fin-
ish].
The printer driver and "RICOH Printer" software are installed
on the computer, and "RICOH Printer" icon is created on the
desktop.
You can now print files on the computer from the printer via the
Wi-Fi router by selecting "Print" from the "File" menu of applica-
tions or use the functions of "RICOH Printer".
• The Wi-Fi router set at the time of the installation can be
changed using "RICOH Printer". For details, see page 4 "Set-
ting an Access Point using "RICOH Printer"".
Setting an Access Point using "RICOH
Printer"
You can set an access point (Wi-Fi router) to use for wireless con-
nection with the printer using "RICOH Printer" on the computer.
• Install "RICOH Printer" to your computer first. For details, see
page 3 "Installing the Printer Driver and "RICOH Printer"
Software".
1. Press and hold the
printer.
2. Connect the computer with the printer using a
USB cable, via a Wi-Fi router, or using the Soft AP
function.
• If the Wi-Fi setting has been set up, you can connect the
computer with the printer via a Wi-Fi router. Enable the Wi-Fi
connection by pressing and holding the
printer for 1 second or longer. The power indicator turns blue.
• For the Soft AP connection, see page 6 "Connecting with a
Computer Directly".
power key to turn on the
power key on the
3. Click "RICOH Printer" icon on the desktop.
The application is launched.
4. Click [Settings].
5. Click [Wi-Fi].
6. If the Wi-Fi setting is disabled, toggle the [WLAN]
switch to enable the Wi-Fi function.
Available access points are searched for, and found access
points are displayed in the list.
• Click [Manual Wi-Fi] to specify an access point by manually
specifying SSID, encryption method, and password. After
specifying an access point manually, click [Connect] to estab-
lish a connection.
7. Click an access point to use.
4