ACU-RITE 01608 Kullanım Kılavuzu - Sayfa 15

Hava İstasyonu ACU-RITE 01608 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. ACU-RITE 01608 20 sayfaları. Rain gauge station

Care & Maintenance

Display Care

Clean with a soft, damp cloth. Do not use caustic cleaners or abrasives. Keep away

from dust, dirt and moisture. Clean ventilation ports regularly with a gentle puff of air.

Wireless Sensor Care

Clean with a soft damp cloth. Do not use caustic cleaners or abrasives.

Rain Gauge Care

Clean with a soft damp cloth. Do not use caustic cleaners or abrasives that

could mar the polished surface of the rain gauge or tipping cups. If the

collector becomes dirty, rain water may not flow correctly through the rain

gauge. Some environmental conditions may require more frequent, periodic

cleaning of the collector. After a cleaning, it is recommended to apply a small

amount of liquid water repellent (found in the automotive section) to the tipping

cups and collector funnel for optimal rain collection.

The rain gauge cannot be used in the winter during freezing temperatures.

Water expands when it freezes. If any water is left within the unit during a

freeze, it can crack the plastic and permanently damage the unit.

Calibrate Temperature & Humidity

The indoor and outdoor temperature and humidity readings can be calibrated

on the display to improve accuracy. Calibration can improve accuracy when

sensor placement or environmental factors impact your data accuracy.

1. To access calibration mode, press AND HOLD the "▲", "▼", and "SET"

buttons for at least 10 seconds.

2. Once in calibration mode, the preference you are currently setting will be

shown on the display

3. Press the "▲" or "▼" buttons to calibrate the data value higher or lower

from the actual reading.

4. Press the "SET" button to confirm the calibration adjustment. The "

will remain illuminated next to calibrated values.

5. The next adjustable data will appear, indicating it is ready to be calibrated.

Repeat Steps 1 - 4 to calibrate additional data.

The preference set order is as follows:

OUTDOOR TEMPERATURE

OUTDOOR HUMIDITY

INDOOR TEMPERATURE

INDOOR HUMIDITY

" icon