Epson ET-5170 Series Manuel - Sayfa 2
Hepsi Bir Arada Yazıcı Epson ET-5170 Series için çevrimiçi göz atın veya pdf Manuel indirin. Epson ET-5170 Series 4 sayfaları.
Sayfayı Yazdır
2
Unpack the black (BK) ink bottle. Hold the ink bottle
upright and slowly turn the bottle cap to remove it.
Caution:
Do not shake or squeeze the ink bottle. Do not touch
the top of the ink bottle after its cap is removed.
3
Insert the ink bottle into the filling port.
Note:
Do not force the bottle into position; each bottle is keyed
for each color.
4
Wait for the ink to fill the tank. Do not squeeze the bottle
or allow it to contact any other surface.
Note:
Ink flows into the tank and stops automatically when the
ink is filled to the upper line. If ink does not flow from the bottle,
lift and reinsert the bottle.
5
When the ink tank is full, remove the ink bottle
and securely close it with the cap. If any ink
remains in the bottle, store it for later use.
Note:
Do not leave the ink bottle inserted; otherwise
the bottle may be damaged or ink may leak.
6
Close the black ink tank cap.
7
Repeat the previous steps for the other colors.
8
Close the ink tank cover.
9
Connect the power cord to the back of the product and to
an electrical outlet.
Caution:
Do not connect to your computer yet.
10
Press the
power button to turn on the product.
Note:
If an error message appears, turn off the product and
check that no protective material has been left inside the
product.
11
ET-5150: Select your language.
ET-5170: Select your language, country, date, and time
settings.
Note:
You can change these settings later using the product's
control panel. For more information, see the online User's Guide.
Follow steps 12 and 13 to continue ink charging.
12
When the message to see the Start Here sheet appears
on the LCD screen, press and hold the
5 seconds.
13
When the ink confirmation message appears on the LCD
screen, select Done to start charging the ink. Ink charging
takes approximately 11 minutes. A message appears
when ink charging is complete.
Caution:
Do not unplug or turn off the product, lift the printer
cover, or load paper while the product is charging or you'll waste
ink.
Note:
After some ink is used for charging, the rest is available for
printing.
14
Follow the on-screen instructions to adjust the print
quality.
Note:
You need to load paper before you can adjust the print
quality. See "Load paper" for details.
help button for