Sony AZ1-L CHASSIS Servis Kılavuzu - Sayfa 27
TV Sony AZ1-L CHASSIS için çevrimiçi göz atın veya pdf Servis Kılavuzu indirin. Sony AZ1-L CHASSIS 33 sayfaları.
Ayrıca Sony AZ1-L CHASSIS için: Servis Kılavuzu (42 sayfalar)
Sayfayı Yazdır
2-2-3. SElECTING THE DESTINATION
After replacing the bAl board or the lCD Panel, the destination location
must be set.
CAUTION: Selecting the incorrect destination may requiring replacing the
bAl board.
DIGITAL
002 MODEL
000 SEG
7.
Press
to move to "001 DEST" sub Category.
1
DIGITAL
002 MODEL
001 DEST
8. Using the table, press
6
to decrease the data value, to select the destination of the
TV.
DESTINATION
GROUP
CODE
TW
TW grp
CO
KDL-32EX707/40EX707/46EX707/52EX707
SERVICE
13 : 3a-2
SERVICE
03: UC (UC grp)
3
to increase the data value or
DATA
DESTINATION
VALUE
6
TAIWAN
21
COLOMBIA
SERvICE ADjUSTMENTS
DIGITAL
002 MODEL
001 DEST
CAUTION: Verify the DESTINATION is set correctly before
proceeding to the next step. If another destination Data
Value is selected, it may possibly corrupt the software which
would require a BAL Board replacement.
9. After verifying the correct destination data value displays,
press
to save (Write) the changes.
0
10. Exit Service Mode by pressing HOmE or
turn the TV power off.
11. Proceed to "Verifying the Model and Panel Information".
2-2-4. vERIFyING THE mODEl AND PANEl INFORmATION
After saving the changes to the service data, verify the information.
1. TV must be in standby mode. (Power off).
2. Access Service Mode.
Press the following buttons on the Remote Commander
within a second of each other:
DISPLAY
Channel
3. Display the DIGITAl Service menu.
NOTE: There are 3 Service Menus for this model, DIGITAL,
CHASSIS, and SUB. If the DIGITAL Service Menu is
not displayed, press JUmP or OPTIONS on the Remote
Commander.
SERVICE
Destination
21: CO (TW grp)
Data Value
5
+
POWER
Volume
22