Epson L575 Kablosuz Kurulum Kılavuzu - Sayfa 46

Hepsi Bir Arada Yazıcı Epson L575 için çevrimiçi göz atın veya pdf Kablosuz Kurulum Kılavuzu indirin. Epson L575 50 sayfaları.
Ayrıca Epson L575 için: Buradan başlayın (4 sayfalar)

Sayfayı Yazdır

1. Setting up Your Product with Wi-Fi Auto Connect

• If you are connecting the product via Wi-Fi Protected Setup (WPS) and the Wi-Fi icon does not appear

on your product's LCD screen, make sure you select one of the WPS options from the product control

panel within 2 minutes of pressing the WPS button on your router.

• Check your wired LAN router or access point to see if the LED for the port to which your product is

connected is on or flashing. If the link LED is off, try the following:

• Make sure the Ethernet cable is securely connected to your product and to your router, access

point, switch, or hub.

• Try connecting your product to a different port or a different router, access point, switch, or hub.

• Try connecting with a different Ethernet cable.

• Try printing to your product from another computer on the network.

Note: If you are using a 5 GHz wireless router, set the router to operate in dual band (2.4 GHz and

5 GHz) mode. See your router documentation for instructions.

• If you are connecting the product via EpsonNet Setup and the Wi-Fi icon does not appear on the LCD,

make sure your product software was installed correctly. If necessary, reinstall your software.

Parent topic:

Network Software Cannot Find Product on a Network

If EpsonNet Setup cannot find your product on a network, try these solutions:

• Make sure your product is turned on and connected to your network. Verify connection using your

product control panel.

• Check if your network name (SSID) contains non-ASCII characters. Your product cannot display non-

ASCII characters.

• Make sure your product is not connected to a guest network.

• If necessary, reinstall your product software and try running EpsonNet Setup again:

1. Reset your product's network settings to their factory defaults.

2. Windows only: uninstall your product software.

3. Initialize your router following the instructions in your router documentation.

Note: If you are reading these instructions online, you will lose your Internet connection when you

initialize your router, so note the next step before initializing it.

Solving Network Problems