Cisco TelePresence IX5200 İlk Kez Kurulum - Sayfa 18
Konferans Sistemi Cisco TelePresence IX5200 için çevrimiçi göz atın veya pdf İlk Kez Kurulum indirin. Cisco TelePresence IX5200 40 sayfaları.
Ayrıca Cisco TelePresence IX5200 için: Hızlı Başlangıç Kullanım Kılavuzu (15 sayfalar), Kullanıcı Kılavuzu (26 sayfalar), Kurulum Kılavuzu (36 sayfalar)
Sayfayı Yazdır
Performing First-Time Setup
Hot swapping of cables is not supported. Be sure to boot or reboot your system after you make any
cabling changes.
Perform camera alignment for your system. If you have a two-table system, proceed to step
Step 5
Place the camera targets (included with the system) so that the line on the back of the target is flush
a.
with the seams between the center and side tabletops.
Be sure that the rear edge of the target is flush with the rear edge of the table.
b.
Be sure that the tabletop is clear, especially the rear edge, then click Continue to begin the test.
c.
Proceed to step
Cisco TelePresence IX5000 and IX5200 First-Time Setup
18
5e.
5d.
OL-27038-01