ACU-RITE 06036 Kullanım Kılavuzu - Sayfa 16

Monitör ACU-RITE 06036 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. ACU-RITE 06036 20 sayfaları. Home environment display

Care & Maintenance

Display Care

Clean with a soft, damp cloth. Do not use caustic cleaners or abrasives. Keep away

from dust, dirt and moisture. Clean ventilation ports regularly with a gentle puff of air.

Calibration

Calibrate Temperature and Humidity

The temperature and humidity readings can be calibrated on the display to

improve accuracy. Calibration can improve accuracy when product placement or

environmental factors impact your data accuracy.

1. Press AND HOLD both the "SET" button and color-coded button (found next

to the location reading you wish to calibrate) simultaneously for 10 seconds.

2. Once in calibration mode, the reading you are currently calibrating will show

on the display.

3. Press the "▲" or "▼" buttons to calibrate the data value higher or lower from

the actual reading. The arrow in the forecast area indicates whether your

current calibrated value is higher, lower or the same as the actual reading.

4. Press the "SET" button to confirm the calibration adjustment. The "

will remain illuminated next to calibrated values.

5. The next adjustable data will be displayed, indicating it is ready to be

calibrated. Repeat Steps 2 - 4 to calibrate additional data.

6. After returning to normal viewing mode, repeat steps 1 - 5 to calibrate

readings for additional locations.

Note: Calibrations will be erased if the display is reset or if batteries are

removed and the power adapter is unplugged.

Calibrate Barometric Pressure

The default pressure mode is set to "auto." In auto mode, the pressure will

calibrate itself over a 14 day Learning Mode. Barometric pressure can be

manually calibrated:

1. Press AND HOLD the "SET" button for at least 10 seconds to enter manual

pressure mode.

2. The "manual" indicator will be shown above the un-calibrated pressure

reading. Press AND HOLD both the "SET" button and color-coded button

(found next to the location name of the display) for 10 seconds.

3. Press the "▲" or "▼" buttons to calibrate the data value higher or lower

from the actual reading. The arrow located next to the pressure reading

indicates whether your current calibrated value is higher, lower or the same

as the actual reading.

4. Press the "SET" button to confirm the calibration adjustment. The "

will remain illuminated next to the calibrated value.

Note: Calibration will be erased if the display is reset or if batteries are

removed and the power adapter is unplugged.

To exit manual pressure mode and return to auto mode press and hold the

"SET" button for at least 10 seconds.

" icon