Sony SSC-M370 Kullanım Talimatları Kılavuzu - Sayfa 15

Dijital Kamera Sony SSC-M370 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Sony SSC-M370 43 sayfaları. Ccd color video camera

Sayfayı Yazdır

Mounting the Lens

Suitable lenses

The lens must be a C mount type, and the screw thread must not project

more than 9 mm (3/z inches) from the lens mounting surface.

{

Lens mounting surface

This camera uses a 1/2-inch CCD, so the lens should be for use with this

size of CCD. In particular, if used with a lens for a 2/3-inch CCD the angle

of view will be different.

Plug fitting for an auto-iris lens

The camera is supplied with a plug to fit the LENS connector. To connect

an auto-iris lens, first replace the plug on the lens cable with the plug

supplied.

1 Solder the lens cable wires to the pins on the plug supplied; apply heat

after putting heat shrink sleeving on the wires. The pin assignment is as

follows.

Pin 1: Power supply (+9 V DC, 50 mA)

Pin 2: Unused

Pin 3: Video signal output (for auto-iris control; 0.7 Vp-p, 40 k ohms, no

synchronizing signal)

Pin 4: Ground

(Refer to the operation manual for the lens to determine the cable color

coding.)