Sony MHC-RG55S Kullanım Talimatları Kılavuzu - Sayfa 31
Stereo sistemi Sony MHC-RG55S için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Sony MHC-RG55S 36 sayfaları. Sony operating instructions mini hi-fi component system mhc-rg66, mhc-rg55s, mhc-rg55
Troubleshooting
Problems and remedies
If you have any problem using this system, use
the following check list.
First, check that the power cord is connected
firmly and the speakers are connected correctly
and firmly.
Should any problem persist, consult your
nearest Sony dealer.
General
The display starts flashing as soon as you plug
in the power cord even though you haven't
turned on the system (see step 5 of "Hooking up
the system" on page 9).
• Press DISPLAY twice when the system is turned
off. The demonstration disappears.
"– –:– –" appears in the display.
• A power interruption occurred. Set the clock and
timer settings again.
The clock setting/radio presetting/timer is
canceled.
• The power cord is disconnected or a power
failure occurs longer than half a day.
Redo the following:
— "Setting the clock" on page 11
— "Presetting radio stations" on page 14
If you have set the timer, also redo "Waking up
to music" on page 27 and "Timer-recording radio
programs" on page 20.
There is no sound.
• Turn VOLUME clockwise.
• The headphones are connected.
• Insert only the stripped portion of the speaker
cord into the SPEAKER jack. Inserting the vinyl
portion of the speaker cord will obstruct the
speaker connections.
• There is no audio output during timer recording.
There is severe hum or noise.
• A TV or VCR is placed too close to the stereo
system. Move the stereo system away from the
TV or VCR.
The sound from the connected source is
distorted.
• If "VIDEO" appears in the display when you
press MD (VIDEO), switch the display to "MD"
(see "Listening to audio from a connected
component" on page 30).
The timer does not function.
• Set the clock correctly.
DAILY 1, DAILY 2, and REC do not appear when
you press CLOCK/TIMER SET.
• Set the timer correctly.
• Set the clock.
The remote does not function.
• There is an obstacle between the remote and the
system.
• The remote is not pointing in the direction of the
system's sensor.
• The batteries have run down. Replace the
batteries.
There is acoustic feedback.
• Decrease the volume level.
• Move the microphone away from the speakers or
change the direction of the microphone.
The color irregularity on a TV screen persists.
• Turn off the TV set once, then turn it on after 15
to 30 minutes. If the color irregularity still
persists, place the speakers farther away from the
TV set.
Speakers
Sound comes from one channel or unbalanced
left and right volume.
• Check the speaker connection and speaker
placement.
Sound lacks bass.
• Check that the speaker's + and – jacks are
connected correctly.
continued
GB
31