Cisco ASA 5545-X Yazılım Kılavuzu - Sayfa 17

Ağ Donanımı Cisco ASA 5545-X için çevrimiçi göz atın veya pdf Yazılım Kılavuzu indirin. Cisco ASA 5545-X 37 sayfaları. Threat defense reimage guide
Ayrıca Cisco ASA 5545-X için: Kurulum Talimatları Kılavuzu (13 sayfalar), Hızlı Başlangıç Kılavuzu (13 sayfalar), Hızlı Başlangıç Kılavuzu (15 sayfalar)

Cisco ASA and Firepower Threat Defense Reimage Guide

c) Press Enter. By default, the password is blank.

d) Access global configuration mode.

configure terminal

e) If you did not use the interactive prompts, copy and paste your configuration at the prompt.

If you do not have a saved configuration, and you want to use the simple configuration described in the

quick start guide, copy the following configuration at the prompt, changing the IP addresses and interface

IDs as appropriate. If you did use the prompts, but want to use this configuration instead, clear the

configuration first with the clear configure all command.

interface gigabitethernetn/n

interface managementn/n

object network obj_any

http server enable

http inside_network netmask inside

dhcpd address inside_ip_address_start-inside_ip_address_end inside

dhcpd auto_config outside

dhcpd enable inside

logging asdm informational

For the ASA 5506W-X, add the following for the wifi interface:

same-security-traffic permit inter-interface

interface GigabitEthernet 1/9

security-level 100

nameif wifi

ip address ip_address netmask

no shutdown

http wifi_network netmask wifi

dhcpd address wifi_ip_address_start-wifi_ip_address_end wifi

dhcpd enable wifi

f) Reformat the disks:

format disk0:

format disk1:

The internal flash is called disk0. If you have an external USB drive, it is disk1. If you do not reformat

the disks, then when you try to copy the ASA image, you see the following error:

%Error copying ftp://10.86.89.125/asa971-smp-k8.bin (Not enough space on device)

g) Save the new configuration:

nameif outside

ip address dhcp setroute

no shutdown

nameif inside

ip address ip_address netmask

security-level 100

no shutdown

subnet 0 0

nat (any,outside) dynamic interface

Reimage from Firepower Threat Defense to ASA

Cisco ASA and Firepower Threat Defense Reimage Guide