Cisco ONS 15454 Kurulum - Sayfa 13

Sunucu Cisco ONS 15454 için çevrimiçi göz atın veya pdf Kurulum indirin. Cisco ONS 15454 32 sayfaları. Four-shelf and zero-shelf bay assembly
Ayrıca Cisco ONS 15454 için: Kurulum Talimatları Kılavuzu (22 sayfalar), Kurulum (32 sayfalar), Paketten Çıkarma ve Kurulum (42 sayfalar), Paketten Çıkarma ve Kurulum (40 sayfalar)

Chapter 1 Install the Shelf and Backplane Cable

Figure 1-1

Continue with the

Step 4

to install an alarm expansion panel (AEP). If not, continue with the

Timing, LAN, and Craft Pin Connections" procedure on page

Stop. You have completed this procedure.

NTP-A119 Install the Alarm Expansion Panel

Purpose

Tools/Equipment

Prerequisite Procedures

Required/As Needed

78-18537-01

Installing the Fan-Tray Assembly

Fan tray

assembly

LCD

"NTP-A119 Install the Alarm Expansion Panel" procedure on page 1-13

This procedure installs an alarm expansion panel (AEP) onto the

15454-SA-ANSI or 15454-SA-HD shelf backplane. The AEP provides

alarm contacts in addition to the 16 provided by the AIC-I card. Typically,

the AEP is preinstalled when ordered with the ONS 15454; however, the

AEP can be ordered separately. The AIC-I card must be installed before

you can provision the alarm contacts enabled by the AEP.

#2 Phillips screwdriver

Medium slot-head screwdriver

Small slot-head screwdriver

Wire wrapper

Standoffs (4)

DLP-A10 Remove the Lower Backplane Cover, page 17-10

As needed

NTP- A119 Install the Alarm Expansion Panel

"NTP-A8 Attach Wires to Alarm,

1-16.

Cisco ONS 15454 Procedure Guide, Release 8.5.1

if you plan

1-13