Cisco ONS 15454 Kurulum - Sayfa 10

Sunucu Cisco ONS 15454 için çevrimiçi göz atın veya pdf Kurulum indirin. Cisco ONS 15454 32 sayfaları. Four-shelf and zero-shelf bay assembly
Ayrıca Cisco ONS 15454 için: Kurulum Talimatları Kılavuzu (22 sayfalar), Kurulum (32 sayfalar), Paketten Çıkarma ve Kurulum (42 sayfalar), Paketten Çıkarma ve Kurulum (40 sayfalar)

Sayfayı Yazdır

NTP-A7 Install the Fan-Tray Assembly

A readily accessible two-poled disconnect device must be incorporated in the fixed wiring. Statement

Warning

1022

When installing redundant power feeds, do not use aluminum conductors.

Warning

If you use redundant power leads to power the ONS 15454, disconnecting one lead will not remove

power from the node.

Always use the supplied ESD wristband when working with a powered ONS 15454. Plug the wristband

Caution

cable into the ESD jack located on the lower-right outside edge of the shelf assembly.

Verify one of the following:

Step 1

•

Complete the

Step 2

Complete the

Step 3

Complete the

Step 4

Continue with the

Step 5

Stop. You have completed this procedure.

NTP-A7 Install the Fan-Tray Assembly

Purpose

Tools/Equipment

Prerequisite Procedures

Required/As Needed

Onsite/Remote

Security Level

Cisco ONS 15454 Procedure Guide, R5.0

1-10

If you have the 15454-SA-ANSI or 15454-SA-HD shelf, a 100-A fuse panel (30-A fuse per shelf

minimum) should be installed. If not, install one according to manufacturer's instructions.

If you have the 15454-SA-NEBS3 shelf, a standard 80-A fuse panel (20-A fuse per shelf minimum)

should be installed. If not, install one according to manufacturer's instructions.

"DLP-A16 Connect the Office Ground to the ONS 15454" task on page

"DLP-A17 Connect Office Power to the ONS 15454 Shelf" task on page

"DLP-A18 Turn On and Verify Office Power" task on page

"NTP-A7 Install the Fan-Tray Assembly" procedure on page

This procedure installs the fan-tray assembly.

#2 Phillips screwdriver

Medium slot-head screwdriver

Small slot-head screwdriver

NTP-A3 Open and Remove the Front Door, page 1-6

NTP-A6 Install the Power and Ground, page 1-9

Required

Onsite

None

Chapter 1

Install the Shelf and Backplane Cable

17-18.

17-19.

17-21.

1-10.

March 2005