Cisco SNS-3595-K9 Yazılım Kurulumu - Sayfa 30

Sunucu Cisco SNS-3595-K9 için çevrimiçi göz atın veya pdf Yazılım Kurulumu indirin. Cisco SNS-3595-K9 38 sayfaları.
Ayrıca Cisco SNS-3595-K9 için: Kurulum Kılavuzu (36 sayfalar)

Sayfayı Yazdır

Install ISE 2.0.1 on the Cisco 3500 Appliance Using the USB Drive

Figure 11: Select Boot Device

Step 9

Select the CD/DVD that you mapped and press Enter. The following message is displayed.

Example:

Please wait, preparing to boot........................................................................

...............................................................................................................

The following options appear:

Cisco ISE Installation (Serial Console)

Cisco ISE Installation (Keyboard/Monitor)

System Utilities (Serial Console)

System Utilities (Keyboard/Monitor)

Step 10

At the boot prompt, press Enter to install Cisco ISE using a serial console.

If you want to use a keyboard and monitor, use the arrow key to select the Cisco ISE Installation (Keyboard/Monitor)

option. The following message appears.

**********************************************

Please type 'setup' to configure the appliance

**********************************************

Step 11

At the prompt, type setup to start the Setup program. See

Setup program parameters.

Step 12

After you enter the network configuration parameters in the Setup mode, the appliance automatically reboots, and

returns to the shell prompt mode.

Step 13

Exit from the shell prompt mode. The appliance comes up.

Step 14

Continue with

Install ISE 2.0.1 on the Cisco 3500 Appliance Using the USB Drive

To install ISE on the Cisco SNS 3515 or Cisco SNS 3595 appliance using the USB drive:

Before you begin

You must create a bootable USB drive. See

Step 1

Plug in your bootable USB drive that has the Cisco ISE ISO image in to the USB port.

Step 2

Restart the system through the KVM console and press F6 to go to the Boot Menu.

Install Cisco ISE Software on Cisco SNS Appliances

Verify the Installation Process, on page

Install Cisco ISE Software on Cisco SNS Appliances

Run the Setup Program, on page 32

35.

Create a Bootable USB Device to Install Cisco ISE, on page

for details about the

31.