Cisco UCS B250 M1 Kurulum ve Servis Notu - Sayfa 23
Sunucu Cisco UCS B250 M1 için çevrimiçi göz atın veya pdf Kurulum ve Servis Notu indirin. Cisco UCS B250 M1 34 sayfaları. Extended memory blade server
Sayfayı Yazdır
S e n d d o c u m e n t c o m m e n t s t o u c s - d o c f e e d b a c k @ c i s c o . c o m
Figure 12
Step 2
Press the DIMM into its slot evenly on both ends until it clicks into place, refer to callout 2 in
The DIMM connector latches will snap into place.
Press the DIMM connector latches inward slightly to seat them fully. Refer to callout 3 in
Step 3
Memory and Performance
This section describes the type of memory that the extended memory blade server requires and its effect
on performance. The following topics are covered:
•
•
•
•
•
Modern processors are designed to support several generations of memory technology. Cisco's Extended
Memory Technology allows us to replace high-density DIMMs with multiple lower-density DIMMs in
a way that is transparent to the processor and to applications. In some configurations, we are emulating
DIMMs that are not available, such as making four 8-GB DIMMs appear to be a single 32-GB DIMM.
In other cases we can emulate high cost-per-bit DIMMs with multiple low cost-per-bit DIMMs; for
example, making four 4 GB DIMMs emulate a 16 GB DIMM.
OL-22474-03
Installing DIMMs in the Blade Server
Supported DIMMs, page 24
Low-Voltage DIMM Considerations, page 25
Memory Arrangement, page 26
Memory Performance, page 28
Memory Mirroring and RAS, page 30
Cisco UCS B250 Extended Memory Blade Server Installation and Service Note
Memory and Performance
Figure
12.
Figure
12.
23