Cisco Firepower 2600 Donanım Kurulum Kılavuzu - Sayfa 43
Ağ Geçidi Cisco Firepower 2600 için çevrimiçi göz atın veya pdf Donanım Kurulum Kılavuzu indirin. Cisco Firepower 2600 44 sayfaları.
Sayfayı Yazdır
Maintenance and Upgrade
Trouble
Power supply health monitoring notifies you if the power supply loses power or malfunctions so that redundancy
is lost. Check the power supply cables to make sure they are functioning. If they are and errors are still
occurring, replace the power supply.
Before you begin
Take note of the following warnings:
Warning
Statement 1018—Supply Circuit
To reduce risk of electric shock and fire, take care when connecting units to the supply circuit so that wiring
is not overloaded.
Warning
Statement 1019—Main Disconnecting Device
The plug-socket combination must be accessible at all times, because it serves as the main disconnecting
device.
Warning
Statement 1024—Ground Conductor
This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the absence
of a suitably installed ground conductor. Contact the appropriate electrical inspection authority or an electrician
if you are uncertain that suitable grounding is available.
Warning
Statement 1030—Equipment Installation
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Warning
Statement 1073—No User-Serviceable Parts
No serviceable parts inside. To avoid risk of electric shock, do not open.
Warning
Statement 1074—Comply with Local and National Electrical Codes
To reduce risk of electric shock or fire, installation of the equipment must comply with local and national
electrical codes.
Step 1
Remove the power supply:
Cisco Firepower Management Center 1600, 2600, and 4600 Hardware Installation Guide
Remove and Replace a Power Supply
39